OneUp Components OneUp EDC V2 Threadless Tool Carrier Red - Size: one size - male
The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.A Threadless, no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube. EDC Tool is sold separately.OneUp Threadless CompatabilityCompatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsulewith the Threadless Carrier.)The tire plug and bacon strips fit within the small storage capsule.Chain pliers are not compatible with the threadless carrier setup.The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)Easy to install in less than 10 minutes, Install InstructionsIncompatible with FOX 38 with Oval Steerer(use an EDC Threaded Install) RockShox 35 Forks, Giant Overdrive 2 Forks. Cannondale Lefty forks and Carbon Steerers.Steerer Tube LengthMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.Fox except Fox 38 with oval steerer = 190mm minRockShox Forks = 220mm minAll other compatible forks = 190mm minMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.