AQUA COMPUTER Leakshield Leakage Protection System Standalone
- Upgrade LEAKSHIELD for your ULTITUBE series - Negative pressure protects your hardware from water cooling leaks - Useful functions such as system monitoring or automatic refilling of coolants - OLED display for control incl. - Stainless steel bracket is included The LEAKSHIELD leak protection system for the ULTITUBE series with stainless steel bracket Upgrade your water cooling system with the LEAKSHIELD function from aqua computer . You can use it to make your ULTITUBE leak-proof. LEAKSHIELD actively prevents leaks and continuously monitors the coolant circuit for errors. LEAKSHIELD replaces the lid and must be mounted on top of the upright expansion tank! The function of LEAKSHIELDS What does LEAKSHIELD do? It creates a negative pressure in the entire cooling system . This means that as soon as there is a leak at one point, no coolant escapes . Instead, air is sucked into the system . To ensure that there is a negative pressure at every point in the circuit, you have to adjust the negative pressure depending on your coolant pump . Any air that enters is pumped out of the system again via the LEAKSHIELD 's integrated vacuum pump and the negative pressure is maintained. Coolant can only escape in the case of very large leaks, such as a completely torn hose. You have everything in view at all times All status and sensor data is shown on the OLED display . The display can be rotated 360 degrees . The integrated, digital RGB LEDs serve various functions: You can set them so that the colors show you the status of the pump , or you can customize them to your liking. Using the USB interface of LEAKSHIELD and the aquasuite software, you can check all data on your PC or control the leak protection system via it instead of the display. Attention: If you steer in the wrong direction or something goes wrong, a signal will alert you - it will also be shown on the display. In an emergency, LEAKSHIELD can force the PC to shut down! Note: Check beforehand whether all your components are qualified for the vacuum process. Particularly soft, thin-walled hoses are not suitable! Technical details: - Dimensions (without bracket): approx. 72 x 36 x 77 mm - Dimensions (with bracket): approx. 140 x 46 x 82 mm - Compatible: aqua computer ULTITUBE series - Negative pressure generated: max. -450 mbar - Operating voltage: 5 V - Display: 128 x 64 Pixel OLED - Operating system: min. Windows 8.1 or newer - Connection: USB 2.0 Type A Contents: 1x USB cable, length approx. 100 cm 2x seals for the glass tube of the expansion tank 1x stainless steel bracket 1x fastening material